Computers & Tablets
Computer Accessories
Phones
Computer Components
Network, Server & Storage
Printers & POSMoxa MiiNePort E1 - Starter Kit - device server
SKU 43764M
| Product Description: | Moxa MiiNePort E1 - Starter Kit - device server |
| Device Type: | Device server |
| Form Factor: | Plug-in module |
| Processor: | ARM |
| RAM: | 4 MB |
| Flash Memory: | 2 MB |
| Data Link Protocol: | Ethernet, Fast Ethernet, serial |
- Specifications
- Description
| General | |
| Device Type: | Device server |
| Width: | 3.39 cm |
| Depth: | 1.625 cm |
| Height: | 1.35 cm |
| Weight: | 9 g |
| Processor / Memory / Storage | |
| Processors Installed: | ARM |
| RAM: | 4 MB |
| Flash Memory: | 2 MB |
| Networking | |
| Form Factor: | Plug-in module |
| Connectivity Technology: | Wired |
| Data Transfer Rate: | 230.4 Kbps |
| Data Link Protocol: | Ethernet, Fast Ethernet, serial |
| Network / Transport Protocol: | TCP/IP, UDP/IP, ICMP/IP, ARP, SMTP, DHCP |
| Remote Management Protocol: | SNMP 1, Telnet, HTTP, TFTP |
| Status Indicators: | Fail, link/activity |
| Features: | Flow control, DHCP support, BOOTP support, ARP support, 1.5 KV Magnetic Isolation, Watch Dog Timer (WDT) |
| Expansion / Connectivity | |
| Interfaces: | 1 x 100Base-TX - RJ-45 ¦ 1 x serial |
| Miscellaneous | |
| Included Accessories: | Evaluation board |
| Cables Included: | 1 x null modem cable ¦ 1 x network cable |
| MTBF: | 5,515,294 hours |
| Compliant Standards: | EMC Class B, EN55024:1998, EN55022:1998 |
| Power | |
| Power Device: | External power adapter |
| Voltage Required: | AC 120/230 V |
| Software / System Requirements | |
| Software Included: | Drivers & Utilities |
| Manufacturer Warranty | |
| Service & Support: | Limited warranty - 5 years |
| Environmental Parameters | |
| Min Operating Temperature: | 0 °C |
| Max Operating Temperature: | 5 °C |
| Humidity Range Operating: | 5 - 95% (non-condensing) |
Moxa's MiiNePort E1 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E1 is empowered by the MiiNe, Moxa's second generation SoC, which supports 10/100 Mbps Ethernet, up to 921.6 Kbps serial baudrate, a versatile selection of ready-to-use operation modes, and requires only a small amount of power. By using Moxa's innovative NetEZ technology, the MiiNePort E1 can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. In addition, the MiiNePort E1 is the size of an RJ45 connector, making it easy to fit into virtually any existing serial device.
- Same size as an RJ45 connector - only 33.9 x 16.25 x 13.5 mm MiiNePort embedded serial device servers
- Extremely low power consumption - only 160 mA @ 3.3 VDC input
- Uses the MiiNe, Moxa's second generation SoC
- NetEZ technology makes integration incredibly easy
The technical details come from 3rd party. edgemo is not responsible for any errors.