D-Link Wireless N Access Point DAP-1360 - radio access point - Wi-Fi
SKU DAP-1360/E
Product Description: | D-Link Wireless N Access Point DAP-1360 - radio access point - Wi-Fi |
Device Type: | Radio access point |
Form Factor: | External |
Data Link Protocol: | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Frequency Band: | 2.4 GHz |
Included Accessories: | Vertical stand |
Dimensions (WxDxH): | 14.8 cm x 11.3 cm x 3.15 cm |
- Specifications
- Description
General | |
Device Type: | Radio access point |
Width: | 14.8 cm |
Depth: | 11.3 cm |
Height: | 3.15 cm |
Weight: | 215 g |
Networking | |
Form Factor: | External |
Connectivity Technology: | Wireless |
Line Coding Format: | DBPSK, DQPSK, CCK, OFDM |
Data Link Protocol: | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Spread Spectrum Method: | OFDM |
Remote Management Protocol: | HTTP |
Frequency Band: | 2.4 GHz |
Status Indicators: | Power, LAN, wireless |
Features: | Auto-negotiation, repeating mode, MAC address filtering, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), Wi-Fi Protected Setup (WPS), wireless bridge mode, Wireless Client Mode |
Encryption Algorithm: | AES, 128-bit WEP, 64-bit WEP, TKIP, WPA-PSK, WPA2-PSK |
Authentication Method: | Radio Service Set ID (SSID), Extensible Authentication Protocol (EAP) |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Aerial | |
Antenna: | External detachable |
Antenna Qty: | 2 |
Directivity: | Omni-directional |
Gain Level: | 2 dBi |
Expansion / Connectivity | |
Interfaces: | 1 x 100Base-TX - RJ-45 |
Miscellaneous | |
Included Accessories: | Vertical stand |
Cables Included: | 1 x network cable |
Mounting Kit: | Included |
Compliant Standards: | FCC Class B certified |
Power | |
Power Device: | External power adapter |
Software / System Requirements | |
Software Included: | Drivers & Utilities |
Environmental Parameters | |
Min Operating Temperature: | 0 °C |
Max Operating Temperature: | 55 °C |
Humidity Range Operating: | 10 - 90% (non-condensing) |
D-Link's Wireless N Open Source Access Point allows you to create your own personal wireless home network to share wireless Internet connection, documents, music, and photos. Using Wireless N technology, it offers a higher speed, extended coverage and virtually no dead spots while still compatible with previous network standards.
This Access Point can be configured to operate in any of the following 7 modes: 1. Wireless Access Point (AP); 2. AP Client to connect to another Access Point; 3. Bridge, with one or more peer APs, to easily create dedicated building-to-building links; 4. Bridge with AP, to allow wireless clients on the bridging link; 5. Wireless repeater, to extend the wireless coverage and cover any "dead spot"; 6. WISP Client Router, to share an Internet connection based on Wi-Fi between wired computers without an additional router; 7. WISP Repeater, to share an Internet connection based on Wi-Fi between wired/wireless computers without an additional router.
Robust security is included, with support for WPA/WPA2 encryption, MAC address filtering and the SSID broadcast disable function, which makes your network invisible for outsiders. A schedule function allows you to turn the wireless network off when not needed, saving energy.
D-Link Click'n Connect (DCC), is an intuitive software wizard that runs directly from the product CD-ROM, helping you to install and configure the device without prior knowledge required.
Advanced users will enjoy adding their own features, as the DAP-1360 is based on an open-source Linux platform.
This Access Point can be configured to operate in any of the following 7 modes: 1. Wireless Access Point (AP); 2. AP Client to connect to another Access Point; 3. Bridge, with one or more peer APs, to easily create dedicated building-to-building links; 4. Bridge with AP, to allow wireless clients on the bridging link; 5. Wireless repeater, to extend the wireless coverage and cover any "dead spot"; 6. WISP Client Router, to share an Internet connection based on Wi-Fi between wired computers without an additional router; 7. WISP Repeater, to share an Internet connection based on Wi-Fi between wired/wireless computers without an additional router.
Robust security is included, with support for WPA/WPA2 encryption, MAC address filtering and the SSID broadcast disable function, which makes your network invisible for outsiders. A schedule function allows you to turn the wireless network off when not needed, saving energy.
D-Link Click'n Connect (DCC), is an intuitive software wizard that runs directly from the product CD-ROM, helping you to install and configure the device without prior knowledge required.
Advanced users will enjoy adding their own features, as the DAP-1360 is based on an open-source Linux platform.
The technical details come from 3rd party. edgemo is not responsible for any errors.